Posts Tagged ‘golf clubs’

« Older Entries

What are the most accurate irons for playing golf?

: December 27th, 2009 : MAN : Comments Off

Want to know what Golf Club Complete Sets are the best? The vast variety of modern clubs can make it difficult to know where to start. The most important factor is not if these are the best golf irons on the market, but if they are the best golf irons for you.

You see you need to choose the club to suit your skill level and your particular preferences, if you have elbow trouble you may want to get a club with a graphite shaft and a polymer or rubber insert in the head to reduce the transmission of the impact with the ball, but other people may be horrified by that selection.

Before you choose a club, you should pay attention to its head design, shaft type and shaft flex. These will combine to affect your game by giving your swing a personality of its own. Club head design

The club head is the most important part of the club, after all that is what makes contact with the ball!
The oversized, traditional blade style, and midsized heads are the distinct head styles. You may consider these novice, middle, and advanced heads.

When just beginning you may desire to test an oversized head, these are made specifically with deep cavity-back designs to allow a little forgiveness if you do not hit the ball correctly. Thier center  of gravity is lower than most,enabling them to get the ball air-born easier.

Midsize heads are a compromise, they still have a slightly over accentuated cavity-back design which gives forgiveness and a wider sweetspot, but are not as deep or wide as the oversized head.

The blade head has a shallow cavity that will allows you to work the ball to get what you want but if you hit the ball wrong, you won’t get any breaks from it.

Shaft Kind

Graphite and steel are the two key shaft kinds. Steel shafts are the most durable, make a club for a heavier feel, but don’t have as many options for the shaft  flex. Graphite shafts are a lot easier to get the flex you want with, but are not as durable and don’t give that heavy feel some people like.

For your playing style in golf it is a good idea to go test the clubs before you purchase them.

The flexibility of the shaft of your golf club affects your swing speed and the ball’s trajectory. When swinging your club you’ll receive a specific amount of bending, so selecting the correct shaft stiffness makes sure the club is at the prime shape when it strikes the ball.

Typically if you swing at 105mph + you need extra stiff, 90 – 105 then you need a stiff, 80 – 95 would be regular, 70 – 85 would be senior rating and less than 70 would be ladies rating.

You may choose to borrow some different clubs from the golf shop at the course and see which one suits your swing style best, or you may prefer to go out with a golf instructor and get suggestions as to what type of shaft flex you need.

To find the best golf irons, you need to test out different syles for yourself instead of relying on figures you have found on paper.

Learn the method for swinging a golf club.

: December 23rd, 2009 : MAN : Comments Off

Welcome to Golf Clubs Beginner Guide. If you are still in the impact of acquisition how to swing a golf club, there are many things to be thoughtful in perfecting your skill. All golfers have different swings, but the fundamentals of the swing are consistent enough to help any golfer improve their game.

Improper grip is a common error among beginning golfers. There are many methods you can use to hold the club and each instructor has their own take on it. Vardon, Baseball, and Interlocking are grips, that you may be shown. You will need to practice before you are able to determine how to best grip the club when you swing it. Viewing a video or flipping through an instructional guide may be of assistance.

Start with the Basics

Stance is also an important factor in learning to properly swing a golf club. It’s paramount that you keep your right shoulder back as it can slip forward in the undisciplined player. Use your right hand to grip the golf club yet make a conscious try to maintain the right shoulder back in alignment with your left shoulder.

Watching the alignment of your body in relationship to the swing and the ball, is an important part of a good golf game. The idea is to make a single, fluid motion with arms extended resulting in a smooth back swing. Make sure that you do not bend you elbow and start the swing using legs, hips, knees, and thighs. Think about a snake as it uncoils, and move your body in the same way.

When you hit the ball each of your arm and club shaft should be producing a straight line. With more practice, you will learn how to swing a golf club better, especially if you remember to maintain your weight in an equal balance on your outer front heel and the inner part of your rear foot. Rotate your hands, wrists, and forearm in a way that the grip end of you club points directly towards your intended target.

There are many ways to receive instruction on how to properly swing a golf club. The more you practice, the more you can work on your set up, waggle and temp in addition to the grip and downswing discussed here. Regular and repeated practice is the key to improving your swing.

Discount Golf Clubs, for those who enjoy the game, but may not have the money to spend on expensive brand name clubs.

: December 22nd, 2009 : MAN : Comments Off

Not every golfer has the budget to buy a set of top-notch clubs. Fortunately there are choices, like purchasing discount golf clubs. Clubs can be purchased at lower than retail pricing in two ways. If you are lucky they might be on sale otherwisw try a golf outlet store. Discount golf clubs can be a good find if you know the golf industry or if you are a beginner in playing golf.

Quality. Is there actually a difference in quality in these 2 choices?

You may think that clones of a golf club made by a reputable manufacturer would be similar in quality to the originals. This is  true generally. Opting for a clone club will give you one with a similar feel and look to that of a bigger, more expensive, named brand. They use the same components and are built in much the same manner. In fact, in comparing the clone and the more expensive model, the absence of a brand name label may be the only difference which is readily apparent. The main check of how effective the clubs are is when you play a round. A cosmetic variance without sacrifice of functionality is well worth the savings found in discount golf clubs.

Obviously a discount golf club won’t hold up to one of higher quality. But you should look over the head and shaft to for scratches or damage. You might get a good price on a floor model if you are lucky. If it’s very damaged, it won’t matter how cheap it is, don’t buy it.

Where To Buy particularly if you are considering buy a discount golf club, which is a major manufacturer clone, you should always buy it from a reputable dealer. Many of the clones are made in third world countries with inferior construction and being sold on the market as the real thing. If you see a clone golf club for sale for an extremely low cost, consider it carefully before purchasing it. It is likely that it will be nothing more than a cheap reproduction which is worth no more than you paid for it.

Authorized dealers will be able to sell you branded club sets. Often last year’s models can be purchased at a lower price in an effort to make room for the latest and greatest models. You can sometimes find clubs at a discount which will save you a lot of money. At other time, the manufacturer possesses an too much of a certain club kind and will offer them to outlets inexpensively. You will not be disappointed if you buy your clubs this way.

For the budget golfer, there are ways to find discount golf clubs which perform similarly to the more expensive ones. Carefully check the clubs before you make your purchase to secure you receive a top-notch ordered of clubs.

Choosing The Right Golf Clubs For Your Game Just Got A Little Bit Easier

: November 7th, 2009 : MAN : Comments Off

Golf has undergone many changes over the years and the equipment we use has changed as well. The traditional iron set is more or less obsolete, with most manufacturers realising the growing popularity of easy-to-hit hybrids and offering irons sets which start at the 4-iron and sometimes even at the 5-iron. It makes sense, as for most club golfers the hybrid is significantly more forgiving to play than the irons.

The USGA and the R&A enforce a limit on the volume of driver heads. That limit is 460cc and for most club golfers, bigger really is better. If you struggle with reliability with your driver, a bigger driver will most likely help in most cases. Triangular profiles and more even weight distribution makes bigger drivers far more reliable, even from miss-hits. Playing a bigger driver means less loss of distance and accuracy on miss-hits.

As with all clubs, the shaft is the engine of your driver. Play a driver with the wrong shaft and you’ll be struggling to find any accuracy or distance. Many of the most common flight problems in golf can be put down to the shaft. If a slice is ruining your scores, a softer shaft might do the trick. If your launch angles are too low, then using a shaft with a more flexible tip for example, could add some loft to your drives. Your driving will develop if you match your driver shaft characteristics to your swing speed. If you don’t know your swing speed, most shaft ratings also tabulate the carry versus swing speed specifications. Check the ratings for various shafts and opt for one with a carry rating that matches your typical yardage.

Hybrid clubs are the top rising segment in golf club sales. If your long irons are inconsistent, some easy-to-hit hybrids could well be your best choice. Built to be forgiving and playable from all lies, hybrids play equally well from the tee, fairway and even the rough. Hybrids are designed to be high launching with soft landings, so most shaft companies are selling specialty shafts built with this in mind.

Iron designs now come in an even wider range of choices. Modern iron design can help many of the most common faults in golf. Slices can be eliminated with offset irons, wider sole designs to minimize the fat shot and help get the ball in the air that much easier. Check the features of your irons. If their design isn’t helping your weak points, then it’s in all probability time for an upgrade.

The scoring clubs have plenty of options to choose from as well. Wedges come in a variety of forgiving designs so you don’t have to compromise your wedge play anymore. If you have problems playing little flop-shots then high lofted wedges are there to help. If your bunker play is erratic, choose an easy to hit hollow sand wedge. These hollow wedges are almost impossible to miss-hit and make easy work of just about any bunker.

Recent changes in equipment rules now allow for some pretty odd looking putter designs. Bizarre looking, but effective. If your putting is erratic, a more forgiving putter design might be the answer. Are you closing the putter towards the hole too much? For right handed golfers that most likely leaves a lot of putts missing to the left of the hole and a face balanced mallet could well be the solution to your putting woes.

The right clubs for your game should make the most of your strengths and diminish your weak points. You won’t need to break the bank either. The component market offers some very high quality clubs to choose from. As an added bonus, these component clubs can be custom built to match your game and that’s the best way to play the right clubs.

Making the right choice of golf clubs will do wonders for your game. For more information on our highest quality clone golf clubs and how these can shave strokes from your scores visit http://www.discountclonegolfclubs.com for a full custom build service.

The Golf Clubs

: November 6th, 2009 : MAN : Comments Off

Your golf clubs can very make a dissimilarity in how well you fool around the activity of golf.  New advancements in golf circle technologies make lighter, bigger, and better golf clubs departing to the experienced as well as spanking golfer.  How do you realize what to gawk for in golf clubs?

For the novice golfer, the basic scenery of golf clubs consists of drivers, wedges, putters and irons. Using the suitable status of golf guild self-control gain the beginner reading quickly and achieve results. Every new-found rank of culture is designed to plus with swing speed and to right faults to enhance your team game – and your score.

You ought to take keen on constraint the style, size, and grade of stuff used to make the golf union shaft. One of the less expensive materials is steel. Golf clubs with a steel shaft weigh new but may perhaps be longer-lasting than other types. The steel shaft might furthermore assign you further administration over those hasty swings. Save you choose a graphite shaft, it spirit be lighter than steel but will be new costly. This rank of humanity is used for long distance shots or for slower swingers.   Largely golf clubs are going away by means of equally steel and graphite shafts.

Occupy in mind that graphite shafts long for not on your own be lighter and easier to handle, they desire also be additional forgiving if you clutch a bad have a go.  They absorb vibration and allow for a much improve feeling hear.  Advantage, you determination pick up quite a lot of distance because the speed of the swing willpower be greater due to the lighter materials.

The flexibility of a shaft is referred to as flex, or bend. The less the bend in a shaft, the added regime the revealing swinger determination fasten. On the added hand, beginners and those among less informative swings commonly use a shaft by greater flexibility. The usual swing speed is from 65 miles per hour for the beginner up to over 100 miles per hour for telltale swingers.

When it comes to selecting a golf the social order driver, chiefly as a beginner, you long for probably willpower one through a formerly made past titanium.  Titanium is stronger, denser, and lighter than steel so the the world earliest might be made larger by way of the same amount of materials.  The plus to having a large principal driver is there is a larger “sweet distinguish” liberal you further area to hit the ball with.  By this category of golf circle first, the group hope against hope be much added forgiving except you miss hit the ball or seize a dire sample.

The goal when buying golf clubs should be to maintain the preeminent golf clubs you could afford, whether they are name brands, used, or a reproduction of one of the name brands.

For more information, visit :

callaway golf center, callaway golf equipment, callaway golf irons

 

How to Consistently Hit Long Golf Drives

: October 28th, 2009 : MAN : Comments Off

Every golf hole starts at the tee. If you’re having problems driving, then you’re starting every single hole at a disadvantage. You might scramble your par with a great putt, but you could well be putting for birdies if your driving is up to scratch.

For nearly all golfers, long golf drives and consistency with the driver are far from being impossible. Being long from the tee is a lot easier than most people understand.

With the modern golf ball and Titanium driver, long drives come from hitting the ball on a high launch angle and getting the best angle of descent. It’s not about wormburners anymore. Long golf drives now come from high launch and long carry.

Sure, with their 120 plus mph club speed and pure striking, pros can still get height on the ball, even with low lofts on their drivers. For most club players though, using drivers with extra loft will increase both length and consistency. Most average players would For the majority of club golfers, drivers with with a loft of between 11 to 14 degrees will give the best results.

Fitting the correct shaft is vital when it comes to being consistent with the driver. The shaft plays a crucial function in all your clubs, but play the wrong shaft in your driver and any miss-hits are expensive.

Most golfers now play graphite shafts in their drivers. Sadly, many golfers also play shafts that are too stiff for their swing speeds. That might account for the most common miss amongst club golfers, the slice. Play a shaft that is too stiff and you’ll almost certainly suffer from a slice.

This has a lot to do with the popular misconception that graphite shafts are too soft. That might have been the case 10 years ago, but current graphite shaft fiber patterns have given us exceptional models with excellent flex profiles.

The majority of golfers would improve their driving by playing lighter driver shafts with softer flex ratings and softer torque profiles. The light-weight will improve swing speed and the medium torque will allow the shaft to load properly during the swing, delivering your driver into the ball with more energy. Longer drives come from higher energy.

Launch angles are also affected by the rigidity of the shaft tip. Your trajectories will suffer if you use a shaft which is too tip-stiff. Launching the ball on the optimum angle is where a long golf drive comes from. Bear in mind, we’re looking for a strong flight, not a low worm burner.

Playing the right combination of driver head and shaft specifications is crucial to consistently long golf drives. Your clubs should help your game, not amplify any swing faults.

Golfing buddies outdriving you? Visit our Clone Golf Clubs site for some long hitting Titanium Drivers and get back some bragging rights.

Why Clone Golf Clubs Make Sense For Your Game

: October 2nd, 2009 : MAN : Comments Off

The old saying in golf was you cant buy a better game. Getting good at golf took a lot of time, application and countless hours on the practice range. Fortunately for most of us, that’s no longer the case. You really can buy a lower handicap.

The average club amateur needs as much help he or she can get from their golf clubs. The size and design of the clubheads. The playing characteristics of the shafts. The material and size of the grips. All these combine to make a golf club which is playable and produces a consistent flight.

We all have individual swings. We all setup to the ball differently. We all hit through the ball differently. There isn’t one golf club that will work for all swings. that’s where Clone Golf Clubs can help.

Quality Clone Golf Clubs aren’t some cheap knock-offs of Taylormade or Ping for example. These are custom built clubs which stand on their own merits and can go a long way to lowering your handicap. These are quality clubs built with quality components. The same components as you’ll find in the major brands.

None of the big OEMs hold the patents for square drivers, offset irons or mallet putters. These are forgiving golf club designs used by all the major manufacturers, including manufacturers of quality clone golf clubs.

Some of the big club manufacturers go so far as to suggest that clone golf clubs use low quality raw materials. With the grade of Titanium used in drivers currently at around $3 a kilo, why would anybody cut corners on that? A kilo of Titanium is enough for 5 driver heads. Why use anything but the best grade materials?

Some would also argue that the tolerances of the finished clone golf clubs just isn’t up to scratch. Well again, here’s a quick news flash. Cast clubs are made from moulds and the casting process costs the same from high or low quality moulds.

All the top Pros use top of the range clubs, no argument there. These are not however off-the-rack clubs. These are golf clubs which have been custom fit to suit their specifications and particular requirements.

The only golf clubs that will work for your swing are clubs that have been custom fit to make the most of your particular swing. Your height, your swing speed, your natural ball trajectory. To play your best golf consistently, you need to fit your clubs to your swing, not the other way round. A high price tag doesnt enter into the equation. You’ll see more improvement from playing a set of custom clone golf clubs than from trying to adapt your swing to an expensive set of off-the-rack clubs.

Next : Learn about Custom Golf Clubs and see how Clone Golf Clubs can help your game.

How to Choose Golf Clubs

: September 17th, 2009 : MAN : Comments Off

Your golf clubs can really make a difference in how well you play the game of golf.  New advancements in golf club technologies make lighter, bigger, and better golf clubs available to the experienced as well as inexperienced golfer. 

How do you know what to look for in golf clubs? For beginners, you will likely have only drivers, wedges, putters and irons in your golf bag. Beginners will need to use the proper type of club to speed up the learning process. Different clubs are designed for different purposes, such as improving swing speed, and correcting faults to improve your score.Always consider the shaft material, size, and style. Steel is always a cheaper material. Steel club shafts last longer than other shaft types. Steel shafts do not flex as much, and give you more control through fast swings. Graphite shafts are lighter than steel, but also more expensive. This club type allows for greater distance, or for slower swings.Steel and graphite shaft options are available on most clubs for sale today. Keep in mind that graphite shafts will not only be lighter and easier to handle, they will also be more forgiving if you have a bad shot.Vibration is absorbed to give you a better feel.  Plus, you will pick up some distance because the speed of the swing will be greater due to the lighter materials.

Flex, or bend are the terms that refer to the flexibility of a shaft. The less the bend in a shaft, the more control the powerful swinger will have. On the other hand, beginners and those with less powerful swings generally use a shaft with greater flexibility. The average swing speed is from 65 miles per hour for the beginner up to over 100 miles per hour for powerful swingers.
When it comes to selecting a golf club driver, especially as a beginner, you will probably want one with a head made out of titanium.  Titanium is stronger, denser, and lighter than steel so the club head can be made larger with the same amount of materials.  The advantage to having a large head driver is there is a larger “sweet spot” giving you more area to hit the ball with.This type of club head allows for more forgiving shots.

The goal when buying golf clubs should be to own the best golf clubs you can afford, whether they are name brands, used, or a reproduction of one of the name brands.

Save Your Golf Club From This Economy By Not Following The Conventional Methods of Marketing!

: September 11th, 2009 : MAN : Comments Off

Golf courses across the country are closing down and going out of business across the United States of America at a awfully startling rate. Florida, the state with more golf clubs than any other state, is seeing this more and more. A lot of these “failing” golf communities are blaming the economy, and some are even blaming the current state of the golf world in general; but I see things differently, they should be pointing the finger at themselves.

The golf industry is behind the times in almost every aspect of running a business in this day and time. Most golf courses still have a website that provides no information and looks like something that my 12 year old daughter could create in a few hours. These golf clubs need to embrace technology and develop a website that both promotes AND generates business. There are a handful of golf marketing businesses that specifically create websites to help generate more business for golf courses and their individual needs, why aren’t more clubs taking advantage of them?

Another way the golf industry is behind the times is simply marketing in general. Look at how much golf courses are promoting themselves. Are they even realizing the amount of effort that their current staff is putting into promoting their golf club? The average golf resorts do the following things which they call “marketing”.

  • They place a black and white ad in the town newspaper showing how they just discounted the price. This only gets them into discount wars with their competition which only causes them to lose MORE money. They should instead be finding things that they are good at and promoting their business on those subjects so it drives more people to the course to take advantage of the things they do best.
  • They place an ad in the yellow pages and local phone book that unfortunately looks like every other ad. Honestly, with the invention of search engines such as Google and the amount of people who use the internet these days, how many people do you think still use the phone book to find information when they could just power up their computer, type in a search term, and have the answer to their question quickly? The answer is almost no one! These clubs that are spending thousands of dollars a year on this single ad could be directing that extra money towards something more beneficial such as a website or direct mail campaign like I mentioned above
  • They place an ad in the local penny saver.  Once again, something that is proven to be ineffective in this day and age. Instead they should be looking at fusion marketing techniques and working with other local businesses to promote their club. They could easily go to the local Chevy dealer and give away a free round of golf with every car purchase. Not only will the dealership easily accept this offer, but it will get new people, with MONEY, at the course and they will easily make up the lost green fee revenue by the new players paying for a cart fee or eating after the round at the club house. They will even convert some of these players into returning players, which will boost residual income. Think about that for a second, if they charge forty dollars a round, and the new players plays on average ten times a year, they just made an extra four hundred dollars off green fees alone. If you get 20 new players a year from the car dealership that’s an extra $8,000 a year from a simple green fee promotion with a car dealership!

Another way golf communities are slowly killing themselves is with real estate. A lot of golf communities that were prospering in the early 2000’s are now drowning in a sea of debt because of unsold lots, unsold homes, and not enough members. What can they do to correct this problem? Let’s look at what Juliette Falls, which is a Florida Golf Resort, in Dunnellon did. They first got a world-class website from a company named Legendary Marketing. They built their website into something that looks very good and promotes exactly what they do. Well guess what, the economy dropped off and now they have over forty homes that are in the price range of $500,000 to more than a million and no one was buying them. How can they turn this around? They came up with an incredible promotion that is how! At Juliette Falls you can stay in a Florida Luxury Golf Home worth over a million dollars, play a round of golf, enjoy the onsite spa and eat at a fancy restaurant for $199 a night. If they sell only one night for every day of the year, that is over $70,000 in additional revenue for the resort AND they get new prospects and leads at the course every single day which they can use to promote to in the future! Why aren’t all the golf communities thinking this way?

As you can see, the golf industry is slowing killing itself by being behind the times in technology, marketing, real estate and a host of other things that will be addressed in a future article. If you are a member of a golf course, or even better part of the members committee, stand up and bring attention to the actions your course is taking. Tell your club they need to break the mold of what they have been doing because it isn’t working. Make them think outside the box! Make your golf resort management company become accountable for the actions the club takes! It may be the only thing left that can save your club!

5 Steps To Enjoy Golf More

: September 9th, 2009 : MAN : Comments Off

Some times it is just as they say, a good walk spoiled, but we all love the game of golf.Enjoy golf more with a few ways.

  • Forbidden play blue tees.

Unless you are at least a 10 handicap or lower, why bother making the golf course even harder than it has to be. If you are shooting in the 90’s or triple digits, it makes no sense making a conscious decision to making the course more difficult.Plays the white tees & takes the extra level of anxiety out of the equation. 

  • Improve your lie

When you are having a recreational round of golf, there is no way you should be playing the strict rules of golf. The average round of golf will be at least 6 hours at courses all over the world.  Golfers would be returning to the tees all day after hitting there first ball out bounds, or searching for every lost ball for 5 minutes. 

So if we are bending the rules to save time, why not bend them to improve your lie, something you can actually benefit from.Play winter rules all the time.

  • Do play different games

Instead playing the same match with your buddies, compete in other categories other than score.  Some examples would be:

Most fairways hit

Least amount of 3 putts

Most 1 putts

  • If it is your honor, take it.

You just birdie the hardest (or easiest) hole on the golf course, it is your tee, you earn it, take it. You will be surprised how often you can have two birdies in a row if you are actually trying to get  two birdies in a row, challenge yourself to get another one.

  • Lower your hope.

If you are a average golfer you play golf twice per week if you’re lucky, on top of that, you don’t practice as much as you should.. You can not honestly think that your game is not exactly what it would be. 

Don’t be so hard on yourself when you’re not playing well, just enjoy the game itself. Even the pros have bad day.

 

« Older Entries